-
Category:
Deburring/Finishing
Machine for deburring and edge rounding processes sheet metal parts in a single pass Above: The Lissmac SBM-L G1S2 machine is suitable for edge rounding stainless steel parts such as these.
Machine ...
Monday, 14 March 2022
-
Category:
FFJournal Connect
Tim Corley - Director of Sales
LISSMAC Corporation
Tim Corley
Director of Sales - LISSMAC Corporation 17 Route 146, Mechanicville, NY 12118 Website: www.getthelissmacedge.com ...
Monday, 12 July 2021
-
Category:
Deburring/Finishing
Extra width and one-pass edge finish enables one fabricator to avoid process holdups Above: Heat and Control uses the Lissmac SMD 526 RR (65 in. wide) to deburr and grain stainless for the food equipment ...
Tuesday, 09 March 2021
-
Category:
Deburring/Finishing
Shifting from manual to automated grinding allows fabricator to provide faster and consistent results Above: Before passing through the Lissmac, left, versus the processed part, right.
Shifting ...
Tuesday, 07 July 2020
-
Category:
Deburring/Finishing
... grade 304 stainless steel. “This standard is put in place so consumers don’t cut themselves when using the finished product,” explains Jim Grunewald, director of operations.
With the Lissmac unit, ...
Wednesday, 27 November 2019
-
Category:
News
November 20, 2019 - Lissmac Corp. celebrated the grand opening of their new building in Mechanicville, New York, on November 15. Above: Lissmac staff along with town and state dignitaries attend the ribbon ...
Wednesday, 20 November 2019
-
Category:
News
June 24, 2019 - LISSMAC Corporation’s ground breaking ceremony was conducted earlier this month, at the construction site of their new U.S. headquarters, to serve the U.S., Canadian, as well as South and ...
Monday, 24 June 2019
-
Category:
News
May 31, 2019 - Lissmac's groundbreaking ceremony is schedule for June 4, 2019 in Mechanicville, New York. May 31, 2019 - LISSMAC Corp. invites all interested parties to attend the ground breaking ...
Friday, 31 May 2019
-
Category:
Deburring/Finishing
... run, due to its use of efficient processes and focus on continually upgrading and improving its fabrication capabilities.
The company recently installed two machines from Lissmac Corp., Waterford, New ...
Wednesday, 05 September 2018
-
Category:
Deburring/Finishing
Lissmac’s design for simultaneous top and bottom grinding, in effect, doubles finishing capacity. Above: Lissmac’s design for simultaneous top and bottom grinding, in effect, doubles finishing capacity. ...
Tuesday, 07 November 2017
-
Category:
Deburring/Finishing
Multipurpose machine package enhances AV equipment maker’s quality, speed and safety Above: The Lissmac unit is able to deburr and edge round parts to dull sharp edges.
Multipurpose machine package enhances ...
Thursday, 06 October 2016
-
Category:
Face Time
Face Time - Prepping part edges after cutting is an important step, says Lissmac Vice President Ingo Heiland Prepping part edges after cutting is an important step, says Lissmac Vice President Ingo Heiland ...
Tuesday, 05 April 2016
-
Category:
Company Profiles
LISSMAC Corp. 17 Route 146 Mechanicville, NY 12188 Office: 518-326-9094 www.lissmac-usa.com
Featured product: The SBM-XS
The SBM-XS machine for double sided deburring and edge rounding of small ...
Thursday, 17 March 2016
-
Category:
Deburring/Finishing
... the blanks through twice if we needed to process both sides. We wanted something faster and more efficient.”
Haas vetted viable options and decided on the Lissmac SBM-L G1S2 because it can edge round ...
Thursday, 12 November 2015
-
Category:
Deburring/Finishing
... manufacturing solutions. Needing to modernize, it purchased the SBM-M 1500 S2 from Lissmac Corp. in July 2013. The machine performs light deburring and edge rounding on parts up to 59.07 in. wide. “Our ...
Friday, 17 October 2014
-
Category:
Deburring/Finishing
... offers many configurations to suit a wide variety of applications.
Developed about 18 years ago, Steelmaster machines are produced in Beckum, Germany. The product line was acquired by Lissmac Maschinenbau ...
Tuesday, 17 September 2013
-
Category:
Creative Shop Solutions
... or trying to achieve results with existing tools.
Mike Sandsmark, facilities manager of General Sheet Metal Works, South Bend, Ind., purchased a grinding and deburring SBM-L machine from Lissmac Corp., ...
Friday, 04 November 2011
-
Category:
Deburring/Finishing
Lissmac's SBM-S processes both sides of sheet metal parts simultaneously and in one pass July/August 2010 - GH Metal Solutions, Fort Payne, Ala., has evolved a great deal since 1958, the year it opened ...
Monday, 09 August 2010
-
Category:
Manufacturing
... metal components."
Freedman conducted research for several months and came across equipment from Lissmac Corp., Halfmoon, N.Y., that could produce a rounded edge in one pass. "The SBM-S deburring and ...
Friday, 11 September 2009
-
Category:
Uncategorised Content
... Weldquip
Lissmac Corp.
FAGOR Arrasate USA Inc.
HE&M Saw
Strong Hand Tools
Osborn
MetalForming Inc.
Savage Saws
T. J. Snow Company
SuperMax Tools
MICROFINISHING TOOLS ...
Tuesday, 01 September 2020