Banner
Products

Lantek Expert V2021 offers powerful slug prevention and destruction solutions

May 31, 2022 - Lantek Expert V2021 programming solution for 2D cutting and punching machines by Lantek Sheetmetal Solutions USA offers shops a powerful new tool to destroy the slugs created as a result of laser cut applications. By tackling the problem at the programming stage, slug destruct can be addressed in the beginning of the process rather than at the end, minimizing the risk of machine shut downs due to collisions, damage to the cutting head, and dangerous and time-consuming fatigue for workers manually picking through metal parts. Slug destruct is the cutting of one large slug into smaller pieces that can easily fall through cut slats. It is done so that large internal contours do not tip up and get caught on the slats or crash onto the laser head. Expert V2021 features several approaches each of which provides more control over the operation, customization, and helps to create a more predictable process.

The programmer can assign “Tabs” or “Wire Joints” that will hold the internal contour to the whole part, preventing tip ups. However, when Tabs are assigned – usually for punch cutting – de-nesting is necessary. The system provides the flexibility to choose Slug Destruct or Assign Tabs depending on the application.

The Spiral Cutting for holes function destroys the residual material left behind in the holes so that if falls into the machine bed, preventing possible collisions while yielding a smoother and faster cutting process without sharp corners with fewer stop-start cycles.

The Intelligent Collision Avoidance (ICA) algorithm has been developed to minimize potential collisions between the heads of fibre laser cutting machines and the unstable contours of raw sheet metal during the cutting process. Due to their speed and power, these machines are often specified to cut thicker sheet metal parts, using high-pressure gases to cut the material, pushing the holes and parts being cut causing them to occasionally “hop” onto the sheet metal when cutting is complete. The ICA algorithm detects which components and scrap elements pose a potential risk to the cutting head as they position themselves on top of the contours or are rotated, automatically assigning one or more micro-cuts to the program. The system defines a safe cutting path, allowing the user to cut parts as soon as possible or at the end of the cycle for unattended cutting.

Lantek Expert V2021 includes 25 innovative cutting, punching and shearing strategies that offer more options for efficient destruction of slugs and to redistribute parts throughout the entire metal sheet to optimize the rigidity of the skeleton and further reduce waste. The system digitalizes scrap with previous cuts, identifies areas on the sheet available and allows for any part to be cut within that space, all with a simple drag-and-drop operation. Another example is Clean Cut technology which can be applied to contours where no lead-ins or micro-joints should be placed, helping to avoid imperfections in the part.

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SecturaSOFT

BEVELING

TRUMPF Inc. Davi Inc. SigmaTEK Systems LLC
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc. Striker Systems

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

STAMPING/PRESSES

Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling AIDA-America Corp.
Burghardt + Schmidt Group EMH Crane Rolleri USA Nidec Press & Automation
Butech Bliss Fehr Warehouse Solutions Inc.

PRESS BRAKES

STEEL

Red Bud Industries UFP Industrial AMADA AMERICA, INC. Alliance Steel
Tishken

MEASUREMENT & QUALITY CONTROL

Automec Inc.

TUBE & PIPE

CONVEYOR SYSTEMS

Advanced Gauging Technologies MC Machinery Systems Inc. BLM Group
Mayfran International

METAL FABRICATION MACHINERY

SafanDarley HGG Profiling Equipment Inc.

DEBURRING/FINISHING

Cincinnati Inc.

PUNCHING

Prudential Stainless & Alloys
ATI Industrial Automation LVD Strippit Hougen Manufacturing

WATERJET

Lissmac Corp. Scotchman Industries Inc.

SAWING

Barton International
Osborn Trilogy Machinery Inc. Behringer Saws Inc. Jet Edge Waterjet Systems
SuperMax Tools

METAL FORMING

Cosen Saws Omax Corp.
Timesavers FAGOR Arrasate USA Inc. DoALL Sawing

WELDING

HYDRAULIC PRESSES

MetalForming Inc. HE&M Saw American Weldquip
Beckwood Press Co.

MICROFINISHING TOOLS

Savage Saws Strong Hand Tools
Triform Titan Tool Supply Inc.

 

T. J. Snow Company

TPMG2022 Brands


BPA_WW_MASTER.jpg