Banner
Special Report: Infrastructure

By Lynn Stanley

Poised for an infusion of cash, America’s infrastructure looks to new steel materials, products and technologies for low maintenance, lightweight solutions that are quick to install

March 2022 - It took 7.6 million lbs. of steel, 2,000 men and 2,200 days of on-site labor to complete the Golden Gate Bridge in 1937. A $25 million grant from President Franklin Roosevelt’s New Deal program made construction possible for what is still considered an engineering marvel. Annual tolls and fees averaging $145 million help offset the Golden Gate’s yearly $85 million maintenance bill.

For state and local bridge owners across the nation, the weight of maintenance demands has grown increasingly burdensome. It’s a story The American Society of Civil Engineers (ASCE) has been telling since 1988 when it issued its first quadrennial Infrastructure Report Card. The nation’s latest marks, posted in 2021, tallied a C-. The bridge category scored a C. The U.S. has a total of 617,000 bridges. According to ASCE, 42 percent of those bridges are at least 50 years old, with 46,154 flagged as structurally deficient.

FFJ 0322 infrastructure image1

Valmont’s Press-Brake Steel Tub Girder bridge system is an economical, lightweight solution that reduces installation time and extends the service life of the structure.

“We need these structures to transport billions of tons in freight from coast to coast,” says Dan Snyder, senior director, business development for the American Iron and Steel Institute (AISI) and director of the Short Span Steel Bridge Alliance (SSSBA). “Commuters, school buses and truckers make 178 million trips across structurally deficient bridges every day.”

The American Road & Transportation Builders Association estimates costs for the nation’s backlog of bridge repairs at $125 billion. “Repairing and/or replacing these bridges with modern steel designs must be a national priority,” Snyder says.

FFJ 0322 infrastructure image2

The PBTG is fabricated from cold-bent structural steel plate.

Infusion

A landmark piece of legislature will give the industry a much needed infusion. In November 2021, the Infrastructure Investment and Jobs Act (IIJA), a five-year, $1.2 trillionAISI button infrastructure package, was signed into law. The bipartisan IIJA marks the country’s largest investment in infrastructure in nearly a century. In January 2022, the U.S. Department of Transportation launched the historic Bridge Replacement, Rehabilitation, Preservation, Protection, and Construction Program (Bridge Formula Program). The Federal Highway Administration (FHWA) will administer the program, which represents the single largest dedicated bridge investment since the construction of the interstate highway system in 1956. It provides $26.5 billion to states, the District of Columbia and Puerto Rico over five years and $825 million for tribal transportation facilities. The funds are expected to help state and county transportation authorities to upgrade approximately 15,000 bridges out of 43,000 structures deemed in poor condition.

“There’s been a lot of talk about the infrastructure bill and how it could modernize highways, roads and bridges,” notes Snyder. “We provide education and resources to help guide DOT representatives and county engineers through the process of steel selection for bridge replacement projects,” he says. “Over the last decade, we’ve been actively engaged in developing innovative steel products in five major areas. These areas complement the infrastructure bill, which promotes broader adoption of advanced technologies.

FFJ 0322 infrastructure image3

Using standard plate widths, the  PBTG is optimized for maximum structural capacity.

“DOTs want products delivered faster. We created a tool that speeds up the time it takes to design a bridge. We call it eSPAN140,” Snyder continues.

The free web-based tool provides preliminary simple-span and modular designs for steel bridges up to 140 ft. long. It provides bridge owners and designers with customized standard designs for rolled beam, plate girder, press-brake tub girder and buried bridges in less than five minutes. The software provides contacts for design/build projects and access to complimentary support.

Growing labor shortages and the need to contain costs prompted SSSBA to find new ways to address those problems. “Approximately 92 percent of contractors are having trouble finding construction workers,” says Snyder. “We considered how we might develop a system that could reduce labor costs and simplify installation. Prefabricated steel tubs proved an effective solution. It’s lightweight, adaptable and reliable.”

FFJ 0322 infrastructure image4

The modular units of this weathering steel rolled beam bridge can be shipped on one truck to the bridge site.

Prefab

The Press-Brake Steel Tub Girder bridge system (PBTG) consists of modular galvanized shallow trapezoidal boxes fabricated from cold-bent structural steel plate. A concrete deck or steel sandwich plate system can be placed on the girder and the modular unit shipped by truck to the work site. Standard plate widths are optimized to achieve maximum structural capacity. With the majority of steel in the bottom flange, torsional stiffness is increased. The closed system is a versatile option for multiple-deck specifications.

“Cutting, welding and bending operations are performed as part of the prefabrication process off site,” he notes. “As a result, one girder can be installed in as little as 22 minutes. The PBTG system is being used in 11 states. The technology is really taking off.”

Valmont Industries Inc., Valley, Nebraska agrees. Founded in 1946, the fabricator has built its reputation in the renewable energy and agriculture markets. “They saw so much promise in the Press-Brake Tub Girder bridge technology that they put the pieces in place to enter that space,” says Snyder.

“Valmont now has a purpose-built plant for PBTG products with an American Institute of Steel Construction (AISC) Certified Bridge Fabricator-Intermediate (IBR) qualification rating,” says Guy Nelson, business development director, North American Structures for Valmont.

FFJ 0322 infrastructure image5

A concrete or steel deck may be cast-in-place or precast on the girder and installed in hours.

The plant, which was designed and built specifically for PBTG products,  houses a 2,000-ton, 60-ft.-long press brake, an automated plate forming process, automated stud welding, and roll cambering along with a network of qualified coating facilities.

The company developed its own press-brake-formed steel tub girder product, called U-BEAM, which offers standardized shapes and components. Specifying the product is easy, and its production is economical.

“Press-brake-formed steel tub girders eliminate the most costly component of a welded steel I-beam—the web to flange weld—and remove the tension zone fatigue sensitive detail,” says Nelson. “The Valmont U-BEAM can be inspected with simple visual observation of the coating to ensure there is no section loss. If galvanized with a zinc coating, the U-BEAM has a 70-year maintenance-free coating life cycle and an overall service life of 100 years. Both steel and zinc are recyclable, helping to create a more sustainable infrastructure.”

“Today Valmont is one of the largest PBTG fabricators,” Snyder says.

FFJ 0322 infrastructure image6

A crew in Buchanan County, Iowa, replaced the Jesup South Bridge with steel, which was designed using the free online tool eSPAN140.

Modular

The SSSBA has also found a way to increase the use of traditional rolled beam and plate girder bridges in nontraditional ways. Prefabricated, or modular, bridge technology can support different methods for faster installation of the substructure, superstructure and deck systems. As an example, a superstructure and deck surface can be transported as one unit to a bridge site and installed in a day.

“The speed of construction and work off-site has advanced,” Snyder says. “It’s a trend I see moving forward.”

When Mark Storey, director and county engineer for Whitman County Public Works in Washington state, was tasked with replacing two rural bridges, the modular rolled steel girder system caught his attention. “We’ve been building concrete bridges for a number of years, but the material got so expensive that we decided to look around,” he says.

Competitive quotes for the manufacture and delivery of both steel and concrete superstructures revealed that the cost for concrete totaled $82,000, while the modular steel girder system came in at $56,000—an immediate cost savings of 31.7 percent.

FFJ 0322 infrastructure image7

Whitman County, Washington, installed a prefabricated steel bridge using a local crew, saving over $30,000.

“By going with steel, we saved $30,000,” says Storey. “That’s big money for a rural county.”

The Seltice-Warner Bridge’s 69-year-old wood structure was replaced in 2020 by three steel modules with fully assembled girders transported to the work site on one truck. The modules were lifted into place with a front-end loader and attached with simple connections. A corrugated steel deck and rails were installed followed by a gravel surface. The 28-ft.-wide by 35-ft.-long modular steel bridge increased the structure’s hydraulic opening and increased its 100-year-flood clearance.

“A concrete superstructure option would have needed a heavy crane service, which can cost up to $8,000 and can be quite difficult to schedule,” Storey says. “The steel structure took just four people to build in one month, which is pretty amazing.”

FFJ 0322 infrastructure image8

Valmont’s U-BEAMs are a fraction of the weight of traditional concrete beams.

Sustainable

One of the things contractors frequently ask Storey is whether their crews need special skills to erect these bridges. “The answer is no. We have a couple of people who are experienced welders but no special certifications are needed to work with the steel. The modules are lightweight, resulting in economies from the use of light construction equipment and fast installation for minimal downtime. Steel gives us a longer life span and minimal maintenance. The material is also recyclable, a growing priority here in Washington.”

Storey also sourced a modular rolled steel girder system for the county’s Belmont Bridge in 2021. The replacement project eliminated a wood structure in a flood plain. The new prefabricated steel structure was 28 ft. wide by 32 ft. long with an HL-93 loading rating. Whitman County saved $30,000 on the job by specifying steel rather than concrete.

Rural bridges like Seltice-Warner and Belmont are what the industry calls off-system bridges. In the past, states generally had to match federal funding with up to 20 percent state or local funding.

For the first time, the Bipartisan Infrastructure Law includes an incentive for states by setting aside new Bridge Formula Program funds to off-system bridges owned by a county, city, town or other local agency.

FFJ 0322 infrastructure image9

Valmont U-BEAMs, paired with a cast-in-place deck, are environmentally conscious, affordable and efficient.

The guidance issued notes that federal funds can be used for 100 percent of the cost of repairing or rehabilitating such locally owned off-system structures.

There are a total of 281,184 off-system bridges in the United States, according to the National Association of Counties, defined as bridges that are located on a public road that are not part of the federal-aid highway system. This incentive could motivate state and local governments to take up projects that are usually not prioritized and often do not have funding available.

SSSBA is currently developing new steel technology engineered to meet the need for resilient infrastructure that can withstand, adapt and recover from changing conditions. The hybrid steel bridge system reduces life cycle maintenance costs and is projected to last 100 years or more.

“AISI helped to develop the premise for a $400,000 pooled fund study for the hybrid steel bridge system,” says Snyder. “The study is being led by the North Carolina Department of Transportation to research implementation of the new product.”

“Structural steel has a storied history, having been used on iconic structures like the Golden Gate and Brooklyn Bridge,” he says. “The ongoing evolution of steel materials, coatings and fabrication techniques also makes it the right choice for the future.”  FFJ

Sources

Banner

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SecturaSOFT

BEVELING

TRUMPF Inc. Davi Inc. SigmaTEK Systems LLC
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc. Striker Systems

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

STAMPING/PRESSES

Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling AIDA-America Corp.
Burghardt + Schmidt Group EMH Crane Rolleri USA Nidec Press & Automation
Butech Bliss Fehr Warehouse Solutions Inc.

PRESS BRAKES

STEEL

Red Bud Industries UFP Industrial AMADA AMERICA, INC. Alliance Steel
Tishken

MEASUREMENT & QUALITY CONTROL

Automec Inc.

TUBE & PIPE

CONVEYOR SYSTEMS

Advanced Gauging Technologies MC Machinery Systems Inc. BLM Group
Mayfran International

METAL FABRICATION MACHINERY

SafanDarley HGG Profiling Equipment Inc.

DEBURRING/FINISHING

Cincinnati Inc.

PUNCHING

Prudential Stainless & Alloys
ATI Industrial Automation LVD Strippit Hougen Manufacturing

WATERJET

Lissmac Corp. Scotchman Industries Inc.

SAWING

Barton International
Osborn Trilogy Machinery Inc. Behringer Saws Inc. Jet Edge Waterjet Systems
SuperMax Tools

METAL FORMING

Cosen Saws Omax Corp.
Timesavers FAGOR Arrasate USA Inc. DoALL Sawing

WELDING

HYDRAULIC PRESSES

MetalForming Inc. HE&M Saw American Weldquip
Beckwood Press Co.

MICROFINISHING TOOLS

Savage Saws Strong Hand Tools
Triform Titan Tool Supply Inc.

 

T. J. Snow Company

TPMG2022 Brands


BPA_WW_MASTER.jpg