Banner
News

AIDA-America to demo stamping press technology at FABTECH Mexico 2022

aida-dsf-c1-a-gap-frame-servo-press-fabtech-2022.jpg

AIDA’s gap frame servo press with AIDA’s exclusive Allen-Bradley control will demonstrate AIDA’s optimized servo silent blanking motion profile at FABTECH® Mexico 2022, booth 504

February 9, 2022 - AIDA-America, Dayton, Ohio, will demonstrate industry leading press technology in booth 504 at FABTECH® Mexico 2022.

Two AIDA presses along with AIDA’s exclusive Allen-Bradley based control for larger servo presses, will be demonstrated at this year’s FABTECH® Mexico event, taking place from May 3rd through 5th at Cintermex in Monterrey, MX.

The first, an AIDA single point, mechanical gap frame press is part of AIDA’s high quality, industry leading gap frame press line, with models ranging from 35 to 250 tons. The fastest acting hydraulic overload protection (HOLP) in the industry at 10 ms, a highly rigid frame with low angular deflection, and the tightest clearances available in a gap frame press, which minimize reverse tonnage, are just a few standard features of these NC1 Series presses.

aida-nc1-mechanical-gap-frame-press-fabtech-mexico-2022.jpg

AIDA single point, mechanical gap frame press will demonstrate AIDA’s high quality, industry leading gap frame press advantages at FABTECH® Mexico 2022, booth 504

The second is AIDA’s A Series single point, direct-drive gap frame servo press, showcasing AIDA’s exclusive Allen-Bradley control.  Standard DSF-C1-A Allen-Bradley control features include a swing-arm mounted 12 in. color touch screen HMI, an Allen-Bradley servo motion controller on ControlLogix® platform, 150 job recipe storage, an integrated tonnage monitor (peak only), a step-feed (CNC handwheel) slide motion control for ease of die set-up, 8 PLS cams, 8 channel die protection with PNP/NPN signals, display of actual and virtual crank angles, and ergonomically designed optical run buttons to provide the highest level of safety while helping to reduce operator fatigue. Additional AIDA DSF-C1-A series highlights are a next generation servo motor with 5-10% higher speeds than AIDA’s previous generation gap frame servo presses, a capacitor-based Energy Conservation and Optimization (ECO) system that reduces peak energy draw, and a state-of-the-art Electronic Over Load Protection (EOLP) system that monitors applied torque through the complete stroke to prevent overloading. This press will be blanking parts with AIDA’s optimized servo silent blanking stroke motion profile, which can only be achieved on a servo press. AIDA’s new DSF-C1-A Series product line is offered in a range of tonnages from 80 to 250 tons.

aida-2-9-22.jpg

AIDA’s exclusive Allen-Bradley based servo press control for 315 – 3,500 ton presses will demonstrate several servo press motion profiles in real-time on a virtual press at FABTECH® Mexico 2022, booth 504

Additionally, AIDA will be exhibiting its exclusive Allen-Bradley based servo press control, the latest in servo press control technology, for servo presses from 315 – 3,500 tons. This fully operational and interactive 19 in. PC touch screen Allen-Bradley control will demonstrate several servo press stroke motion profiles in real-time on a virtual press. Control features include direct access to a pdf of the press manual and display of actual and virtual crank angles.

Knowledgeable AIDA associates, including local, Mexico-based  personnel, will be available to demonstrate both presses and the Allen-Bradley servo press control, share their features and benefits, explain the advantages AIDA’s top quality presses can bring to any pressroom, and discuss AIDA’s full metalforming equipment line-up.

Banner

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SecturaSOFT

BEVELING

TRUMPF Inc. Davi Inc. SigmaTEK Systems LLC
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc. Striker Systems

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

STAMPING/PRESSES

Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling AIDA-America Corp.
Burghardt + Schmidt Group EMH Crane Rolleri USA Nidec Press & Automation
Butech Bliss Fehr Warehouse Solutions Inc.

PRESS BRAKES

STEEL

Red Bud Industries UFP Industrial AMADA AMERICA, INC. Alliance Steel
Tishken

MEASUREMENT & QUALITY CONTROL

Automec Inc.

TUBE & PIPE

CONVEYOR SYSTEMS

Advanced Gauging Technologies MC Machinery Systems Inc. BLM Group
Mayfran International

METAL FABRICATION MACHINERY

SafanDarley HGG Profiling Equipment Inc.

DEBURRING/FINISHING

Cincinnati Inc.

PUNCHING

Prudential Stainless & Alloys
ATI Industrial Automation LVD Strippit Hougen Manufacturing

WATERJET

Lissmac Corp. Scotchman Industries Inc.

SAWING

Barton International
Osborn Trilogy Machinery Inc. Behringer Saws Inc. Jet Edge Waterjet Systems
SuperMax Tools

METAL FORMING

Cosen Saws Omax Corp.
Timesavers FAGOR Arrasate USA Inc. DoALL Sawing

WELDING

HYDRAULIC PRESSES

MetalForming Inc. HE&M Saw American Weldquip
Beckwood Press Co.

MICROFINISHING TOOLS

Savage Saws Strong Hand Tools
Triform Titan Tool Supply Inc.

 

T. J. Snow Company

TPMG2022 Brands


BPA_WW_MASTER.jpg