Banner
Spotlight: Supply Chain

Weakest link

By Lynn Stanley

According to one 2021 survey, only 21 percent of participants said they had confidence in their supply network’s capacity to quickly flex sourcing, manufacturing and distribution operations when necessary.

Can a broken supply chain and logistics network ultimately point service centers and manufacturers toward a stronger future?

December 2021 - In his 1948 speech to the House of Commons, British Prime Minister Winston Churchill said, “Those that fail to learn from history are doomed to repeat it.” More than 70 years later, the iconic phrase raises an important question for service centers and manufacturers impacted by supply chain shortages. The black swan event that stretched around the world has exposed the frailty of the system, leaving U.S. businesses scrambling to gain a foothold in a volatile economy. Chicago Tube & Iron Co. Chairman Dr. Donald McNeeley, Ken Kaufmann Jr., president of CEP Technologies Inc., and Scott Schrinner, head engineer for a large HVAC manufacturer, talk frankly about the pitfalls and some of the steps they have taken to navigate the day-to-day challenges.

Chicago Tube & Iron Co. was founded in 1914 on Chicago’s South Side. The company has posted 107 years of consecutive profitability—a feat that has provided it with the capital for continued growth and job creation. Today, the service center, along with parent company Olympic Steel Inc., has 34 locations throughout the U.S. and Mexico with 4.2 million sq. ft. of processing facilities. Chicago Tube & Iron ranks among the top 10 distributors in the U.S. for round mechanical tubing; aluminum pipe, tube and bar; carbon steel pipe; cold finished/hot roll bar and ASME pressure parts.

FFJ 1221 spotlight image1

"Steel, copper and other metals are at record highs—the highest in the industry’s history." - Donald McNeeley, Chicago Tube & Iron Co.

Black swan

Of the pandemic-induced supply chain disruption, McNeeley, who is also a professor at Northwestern University McCormick School of Engineering, says, “it’s a black swan event like no one has seen before.

“We have inventory shortages from ketchup packets and pickles to semiconductors and nearly everything in between,” he says. “The chokehold on semiconductors alone has resulted in record shortfalls for new and used cars and rentals. Our over-reliance on imports from China and labor shortages created because employers can’t compete with inflated unemployment benefits add to the problem.

“Another essential component is the underlying reliance on the logistics infrastructure, a $1.6 trillion industry,” McNeeley says. “Currently, for 85 containers of goods waiting at our ports, there is only one truck.”

Typically an oversupply of goods or services reduces prices, resulting in higher demand. Conversely, an undersupply results in higher prices and lower demand. Equilibrium is achieved when supply and demand balance each other and prices stabilize.

With more than 40 years at the helm of Chicago Tube & Iron, McNeeley has seen his share of volatility. “COVID-19 created an 18-month shutdown,” he says. “Demand fell significantly. As a result—at least temporarily—we had surplus inventories in the supply chain. In 2021, demand came back with a vengeance. When the doors opened, demand grew exponentially and surplus inventories in the channel were quickly depleted.”

These deficits affected lead times. According to Deloitte’s 2021 Manufacturing Industry Outlook, a survey revealed that only 21 percent of respondents had confidence in their supply network’s visibility and capacity to quickly “flex sourcing, manufacturing and distribution, if needed.”  National consulting firm WestMonroe conducted an executive poll that found a majority of organizations conceded they will likely still be recovering during early 2022.

FFJ 1221 spotlight image2

Chicago Tube & Iron Co. Chairman Donald R. McNeeley, center, is flanked by Janeth Villalobos-Quiroz, vice president of administration, and Bob Brady, vice president of finance.

Backlogs

“It’s not unusual to see lead times of 12 months for raw materials,” says McNeeley. “As lead times get longer, demand increases and so does the price. Steel, copper and other metals are at record highs—the highest in the industry’s history,” citing the CRU Index for steel at $1,800 per ton.

“Today, if I have to order steel with a 10- to 12-month fulfillment cycle and I purchase it for the current price of $1,800 a ton, I have to proceed cautiously because steel futures are reflecting price decreases on the horizon for 2022. You have to figure out how to balance your needs without surrendering the gains you’ve achieved.”

FFJ 1221 spotlight image3

CEP Technologies produces miniature to small, thin-gauged parts (above & below) for the EMI/RFI shielding, automotive and electrical markets from a wide range of materials.

FFJ 1221 spotlight image4

Feast or famine

For 60-plus-year-old family-owned CEP Technologies Corp., it has been feast and famine for the raw materials it needs. The IATF 16949:2016 certified precision stamper designs and builds progressive tooling and produces miniature to small, thin-gauged parts for the EMI/RFI shielding, automotive and electrical markets. CEP buys low- and high-carbon steel, high-performance alloys, copper, brass, phosphor bronze, nickel silver and 300 series stainless in coil thicknesses of 0.004 in. to 0.015 in.

The stamper can maintain a profile tolerance of 0.0015 in., a maximum part burr size of 0.0005 in. and flatness tolerances of less than 0.003 in. Headquartered in Yonkers, New York, CEP’s production facilities in San Antonio, Texas, and Chengdu, China, can support medium- to high-volume production runs ranging from 25,000 pieces to 100 million pieces a year. Its presses, ranging from 15 to 60 tons, can run material as thin as 0.002 in. to 0.125 in. The company also provides rapid prototyping, reel-to-reel and barrel plating, heat treating, deburring, anodizing, e-coating, cleaning and tape and reel packaging.

FFJ 1221 spotlight image5

"For certain industries, there may only be one or two suppliers you can go to for the product you need." - Ken Kaufmann Jr., CEP Technolgies Inc. 

“Right now, copper-based products pose the biggest problem for us,” says Kaufmann. “Lead times are from 40 to 50 weeks.” Jobs hinge on receipt of materials. The subsequent production stops/starts have created another issue downstream of CEP.

“Let’s say I have a job that calls for 100,000 pieces a month but I’m delayed a month or more because of raw material shortfalls,” Kaufmann says. “Material tends to come in all at once, which means I have to double and triple my capacity to catch up. Then I have to send all those parts to my supplier for heat treating, plating and other processes to clear my backlog. That means they are inundated. It’s the proverbial domino effect.”

Kaufmann notes that CEP’s China facility is not experiencing the supply chain delays in metals that the U.S. is seeing. China’s tendency to hold inventory versus America’s just-in-time manufacturing practices could explain that difference. In general, though, “multiple locations don’t matter for manufacturers at the high end of the supply chain,” he continues. “When you are at our level, there are not many suppliers you can turn to. Manufacturing in the U.S. has been in a consolidation mode for a number of years. That condition was compounded by the pandemic. For certain industries, there may only be one or two suppliers you can go to for the product you need.”

FFJ 1221 spotlight image6

Ray Ramos, left, CEP President Ken Kaufmann Jr. and Roy Rincon discuss a tooling issue.

Working harder

Product scarcity prompted Scott Schrinner, head engineer for a major HVAC manufacturer, to get creative. As sidelines, he restores classic cars  and helps to run a commercial horse stable where renovations, fencing repair and replacement, lighting installation, electrical and plumbing updates are perennial projects.

At his day job, “we began to experience some major supply chain bumps eight months ago, primarily with variable frequency drive (VFD) electrical components and programmable logic controls (PLC),” says Schrinner. “These parts all need semiconductors. Now we’re having difficulty sourcing standard hardware like aluminum pipe fittings. It’s a very common product but it carries a six-month lead time.”

The manufacturer’s in-house capabilities help mitigate delays. Vibratory deburring, grinding, robotic spot welding, waterjet, fiber laser and fiber tube cutting, stamping presses up to 400 tons and 14-ft.-long press brakes reside in 700,000 sq. ft. of space and are complemented by a comprehensive tool room. The company performs plating, electrical and powder coating and is building a 75,000-sq.-ft. e-coat facility.

“We are at pre-COVID production levels with pre-pandemic lead times, but we have to work harder to get material and components to meet required timeframes,” Schrinner says.

Working harder means fabricating parts, or purchasing near components and modifying them, in house. The company has had to buy parts at consumer list prices when they can’t be purchased through preferred vendors at OEM pricing.

“Our stainless sheet has to be shipped expedited freight so we can meet deadlines,” Schrinner says. “Our copper tubing supplier isn’t taking orders in 2022 because of the backlog. We placed an order in February and received it in May. We placed another order in April, and it’s not scheduled to arrive until February 2022.”

To keep jobs on track, Schrinner has taken on a purchasing role to source alternatives to parts that are not readily available. “We’re probably seeing one request per day come into engineering regarding product sourcing with a ship date that doesn’t match our customer’s requirements,” he says. “You can’t rely on your MRP or ERP systems to do that. If you need a two-week delivery and data for that part is 10 weeks, most MRP systems can’t flag those types of things. We have to manually check availability against order requests and then figure out if we can secure the product somewhere else.”

That isn’t as easy. The requirement for UL-certified parts restricts the number of alternate components Schrinner can use. UL-listings ensure parts meet safety standards for operation. “If I can’t get a circuit breaker I need, I can’t just go out and buy one from another company because it may not be UL-listed,” he says. “If I can’t find a viable alternative, I have to go back to UL, report my findings and request that they approve the part and add it to our file for approved parts. That also usually means a hefty price tag. You don’t see these types of costs in normal manufacturing, but [such situations] will last as long as we’re dependent on other countries for raw materials and electrical components.”

FFJ 1221 spotlight image7

Scott Schrinner, head engineer for a major HVAC manufacturer, finds standard items like variable frequency drives, copper tubing and pipe fittings difficult to source.

A new model

McNeeley agrees. “As a country, as an industry, in our quest to find the cheapest, fastest and leanest, I think we may have overplayed our hand. Just-in-time manufacturing lowers inventory investment, which results in a higher return and increased profits for everyone in the pipeline. It works perfectly on paper and things generally work out fine in real life, but the pandemic has revealed that the system is brittle and leaves us vulnerable to black swan events.”

A fix for the supply chain might mean accepting a bit less optimization—“one that allows for a buffer inventory that can help head off the negative impact of an event like this,” he says.

If there’s a silver lining to be had, McNeeley, Kaufmann and Schrinner agree there are answers to be found in transparent communication up and down the pipeline; partnering with customers and suppliers; reshoring and reconstituting education to preserve and grow the skills that form the backbone of U.S. manufacturing.

While the pandemic has exposed supply chain flaws and weaknesses—some of which have been brewing for years—it has brought many back to their roots. Inventiveness and the flexibility to consider doing things a different way has resurfaced.

“In Greek mythology, the phoenix was a bird that cyclically regenerates,” says McNeeley. “The industry will, too.”  FFJ

Banner

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SecturaSOFT

BEVELING

TRUMPF Inc. Davi Inc. SigmaTEK Systems LLC
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc. Striker Systems

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

STAMPING/PRESSES

Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling AIDA-America Corp.
Burghardt + Schmidt Group Fehr Warehouse Solutions Inc. Rolleri USA

STEEL

Butech Bliss UFP Industrial

PRESS BRAKES

Alliance Steel
Red Bud Industries

MEASUREMENT & QUALITY CONTROL

AMADA AMERICA, INC.

TUBE & PIPE

Tishken Advanced Gauging Technologies Automec Inc. BLM Group

CONVEYOR SYSTEMS

METAL FABRICATION MACHINERY

MC Machinery Systems Inc. Prudential Stainless & Alloys
Mayfran International Cincinnati Inc. SafanDarley

WATERJET

DEBURRING/FINISHING

LVD Strippit

PUNCHING

Barton International
ATI Industrial Automation Scotchman Industries Inc. Hougen Manufacturing Flow International Corporation
Lissmac Corp. Trilogy Machinery Inc.

SAWING

Jet Edge Waterjet Systems
Osborn

METAL FORMING

Behringer Saws Inc. Omax Corp.
SuperMax Tools FAGOR Arrasate USA Inc. Cosen Saws

WELDING

Timesavers MetalForming Inc. DoALL Sawing American Weldquip

HYDRAULIC PRESSES

MICROFINISHING TOOLS

HE&M Saw Strong Hand Tools
Beckwood Press Co. Titan Tool Supply Inc. Savage Saws T. J. Snow Company
Triform

 

 

 


BPA_WW_MASTER.jpg