Banner
Products

Scotchman Industries

October 2014 - Scotchman Industries is pleased to announce the addition of three new products to their industrial cold saw line; the CPO 315 HFA-CNC fully automatic hitch feed saw, the SUP-600 non ferrous upcut saw, and the GAA-500 90 automatic upcut circular cold saw.

SCOTCH-CPO-315-HFA-CNC-575

The new CPO 315 HFA-CNC cold saw is fully programmable so every cut length is fast and accurate, taking the Hitch Feed Automatic saw to a new level.  It uses a 30 in. linear actuator, driven by a servo motor. With its 315mm blade, it allows you to cut up to 3-1/2 in. diameter tubes or pipe and up to 1-3/4 in. solid material, while maintaining a length tolerance of ± .006 in. per index. 

The CPO 315 HFA-CNC standard features include a large 10 in. touch screen control, an unlimited length setting with a 30 in. single length shuttle, and a variable speed control. The setup to change to a different part length only takes a few seconds; plus, the first part cut is always accurate! You do not need to cut a test piece and reset the stop. This saw has the ability to program either to a set length with a number of pieces to cut or enter up to 4 separate lengths and amounts to be cut in sequence. This American-made machine is available in 230 volt and 460 volt configurations and is backed by Scotchman Industries’ Best-in-the-Business 3-year warranty.

SCOTCH-SUP-600-NF MED-300

Scotchman Industries is pleased to also announce the addition of the SUP-600 NF to their existing lineup of circular cold saws. The SUP-600 NF is an Upcut Circular Cold Saw designed specifically for cutting non-ferrous material. Featuring a 24 in. (600 mm), 132 tooth carbide blade that is capable of producing round cuts up to 9 in. in diameter and rectangular cuts up to 15 by 6, the SUP-600 NF offers an increased cutting capacity not found in traditional pivot down saws.

Standard features of the SUP-600 NF include an adjustable feed rate, mitering capability with fixed stops at 22.5º, 45º, 90°, -45°, and -22.5º, two horizontal and two vertical pneumatic clamps to secure material being cut, and a 4-1/2 in. port for chip collection plus a drawer under the bottom of the saw. Standard safety features include dual hand operation and a safety interlock that will prevent the saw from operating if the safety hood is not closed. The SUP-600 NF is available in 230 volt and 460 volt configurations and is backed by Scotchman Industries’ 3-year warranty.

SCOTCH-GAA-500-90-575

Finally, Scotchman Industries is proud to introduce the GAA-500 90, Automatic Upcut Circular Cold Saw, the newest addition to the non-ferrous saw line. The GAA-500 90 is a large capacity upcut automatic saw for cutting non-ferrous materials at 90° up to 6 in. square and round. The saw uses a shuttle feed design with an adjustable vertical and horizontal clamp system to fit almost any profile.  Standard features include a 7.5 hp motor that delivers a cutting speed of 3,000 rpm, pneumatic mist coolant system, and a base designed with 2 chip extraction ports.  Cut lengths are set by moving the hard stop that is connected to a ball screw and hand crank. The rotary dial allows for fast and easy length adjustments and part lengths are easily held to the length tolerance of +/- .006 in. per index. The GAA-500-90 is available in 230 volt and 460 volt configurations and is also backed by Scotchman Industries’ Best-in-the-Business 3-year warranty.

 

Sources

Banner

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SecturaSOFT

BEVELING

TRUMPF Inc. Davi Inc. SigmaTEK Systems LLC
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc. Striker Systems

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

STAMPING/PRESSES

Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling AIDA-America Corp.
Burghardt + Schmidt Group Fehr Warehouse Solutions Inc. Rolleri USA

STEEL

Butech Bliss UFP Industrial

PRESS BRAKES

Alliance Steel
Red Bud Industries

MEASUREMENT & QUALITY CONTROL

AMADA AMERICA, INC.

TUBE & PIPE

Tishken Advanced Gauging Technologies Automec Inc. BLM Group

CONVEYOR SYSTEMS

METAL FABRICATION MACHINERY

MC Machinery Systems Inc. Prudential Stainless & Alloys
Mayfran International Cincinnati Inc. SafanDarley

WATERJET

DEBURRING/FINISHING

LVD Strippit

PUNCHING

Barton International
ATI Industrial Automation Scotchman Industries Inc. Hougen Manufacturing Flow International Corporation
Lissmac Corp. Trilogy Machinery Inc.

SAWING

Jet Edge Waterjet Systems
Osborn

METAL FORMING

Behringer Saws Inc. Omax Corp.
SuperMax Tools FAGOR Arrasate USA Inc. Cosen Saws

WELDING

Timesavers MetalForming Inc. DoALL Sawing American Weldquip

HYDRAULIC PRESSES

MICROFINISHING TOOLS

HE&M Saw Strong Hand Tools
Beckwood Press Co. Titan Tool Supply Inc. Savage Saws T. J. Snow Company
Triform

 

 

 


BPA_WW_MASTER.jpg