Banner
Products

Strong Hand Tools

BuildPro-MAX-Image

August 2013 - The 8-ft.-by-4-ft. BuildPro MAX Table (above) is constructed of precision, hardened steel plates with 5/8 machined holes in a 2-in.-by-2-in. grid pattern. BuildPro Clamps and Modular Fixturing Components can be inserted into any of the tabletop holes for unlimited options in the set-up of welding fixtures (dedicated, short run, or prototypes). Each plate can be removed and reconfigured to extend the table width. Additional BuildPro plates can be added at either end, or the sides of the tabletop, to increase table length and width to better accommodate larger projects. The BuildPro Tables can also be joined together for oversized fixturing jobs.  

The BuildPro MAX table has a heavy duty five beam support base with a 7,500 lb. (3.75 tons) load capacity. BuildPro MAX Tables are available with a standard finish, or a nitrided finish for anti-splatter, wear resistant corrosion protection.

FrameBuilder-Kits-Image

The FrameBuilder Tabletop (above) is 32-in. by 48-in. with 5/8-in. holes in a 2-in. grid pattern. The FrameBuilder Clamps and Modular Fixturing Components can be inserted into the 5/8-in. holes at any point on the tabletop for complete flexibility in the set-up of fixtures for dedicated, short run, or one time use fixtures. The FrameBuilder Kits give welders and craftsmen proper fixturing capabilities for increased productivity and work quality.  

Choose from six kits designed to suit specific types of stock for frame building: A) Square Tubes  B) Round Tubes  C) I-Beam  D) 3D Carts  E) Sheet Metal and F) The Super Kit with the largest variety of clamps and components. The FrameBuilder Kits contain all the Clamps and Components needed to locate, stop, position, clamp, and elevate stock for welding clearance.

The FrameBuilder Table provides two height options to best accommodate available work space. Used with the tabletop frame only, and set on top of an existing work surface, the maximum height is: 7-in.-8-in. Or, use the (included) leg frame, and setup the FrameBuilder Table as a stand alone work surface at heights of 34-in.-36-in. A set of four leveling feet are included. 

Sources

Banner

Company Profiles

AIR FILTRATION

IRONWORKERS

NESTING SOFTWARE

SERVICE CENTERS

Camfil APC - Equipment Trilogy Machinery Inc. Metamation Inc. Admiral Steel
Camfil APC - Replacement Filters

LASER TECHNOLOGY

PLASMA TECHNOLOGY

Alliance Steel
Donaldson Company Inc. AMADA AMERICA, INC. Messer Cutting Systems Inc.

SOFTWARE

BENDING/FOLDING

Mazak Optonics Corp.

PLATE

Enmark Systems Inc.
MetalForming Inc. MC Machinery Systems Inc. Peddinghaus Lantek Systems Inc.
RAS Systems LLC Murata Machinery, USA, Inc.

PLATE & ANGLE ROLLS

SigmaTEK Systems LLC

BEVELING

TRUMPF Inc. Davi Inc. Striker Systems
Steelmax Tools LLC

LINEAR POSITION SENSORS

Trilogy Machinery Inc.

STAMPING/PRESSES

COIL PROCESSING

MTS Sensors

PRESS BRAKE TOOLING

AIDA-America Corp.
Bradbury Group

MATERIAL HANDLING

Mate Precision Tooling

STEEL

Burghardt + Schmidt Group Fehr Warehouse Solutions Inc. Rolleri USA Alliance Steel
Butech Bliss UFP Industrial

PRESS BRAKES

TUBE & PIPE

Red Bud Industries

MEASUREMENT & QUALITY CONTROL

AMADA AMERICA, INC. BLM Group
Tishken Advanced Gauging Technologies Automec Inc. Prudential Stainless & Alloys

CONVEYOR SYSTEMS

METAL FABRICATION MACHINERY

MC Machinery Systems Inc.

WATERJET

Mayfran International Cincinnati Inc. SafanDarley Barton International

DEBURRING/FINISHING

LVD Strippit

PUNCHING

Flow International Corporation
ATI Industrial Automation Scotchman Industries Inc. Hougen Manufacturing Jet Edge Waterjet Systems
Lissmac Corp. Trilogy Machinery Inc.

SAWING

WELDING

Osborn

METAL FORMING

Behringer Saws Inc. American Weldquip
SuperMax Tools FAGOR Arrasate USA Inc. Cosen Saws Strong Hand Tools
Timesavers MetalForming Inc. DoALL Sawing T. J. Snow Company

HYDRAULIC PRESSES

MICROFINISHING TOOLS

HE&M Saw

 

Beckwood Press Co. Titan Tool Supply Inc. Savage Saws

 

Triform

 

 

 


BPA_WW_MASTER.jpg