Assuming lissmac is required, the following 22 results were found.
-
LISSMAC Corporation to Showcase Cutting-Edge Metal Processing Technology at FABTECH 2024
Visit Booth # S22189 for innovative solutions offering versatility, efficiency, and quality LISSMAC Corporation, a leader in metal processing and construction technology solutions, is excited to announce its participation in FABTECH 2024, the premier...
-
kind of a lemon from the getgo. We just had so many repairs,” Norris says.” A FAMILIAR FACE sales calls and Norris visited Lissmac’s booth at Fabtech. As a result, Glastender eventually purchased three Lissmac machines: an SMW 536 wet deburring machine...
-
Machine for deburring and edge rounding processes sheet metal parts in a single pass Above: The Lissmac SBM-L G1S2 machine is suitable for edge rounding stainless steel parts such as these. Machine for deburring and edge rounding processes sheet metal...
-
Tim Corley - Director of Sales LISSMAC Corporation Tim Corley Director of Sales - LISSMAC Corporation 17 Route 146, Mechanicville, NY 12118 Website: www.getthelissmacedge.com Phone: (518) 326-9094 Email: [email protected] Connect with me...
-
Extra width and one-pass edge finish enables one fabricator to avoid process holdups Above: Heat and Control uses the Lissmac SMD 526 RR (65 in. wide) to deburr and grain stainless for the food equipment industry. Extra width and one-pass edge finish...
-
manual to automated grinding allows fabricator to provide faster and consistent results Above: Before passing through the Lissmac, left, versus the processed part, right. Shifting from manual to automated grinding allows fabricator to provide faster and...
-
consumers don’t cut themselves when using the finished product,” explains Jim Grunewald, director of operations. With the Lissmac unit, users can engage the stations needed based on the processing required for the part. Pro Metal studied its options for...
-
Lissmac holds grand opening ceremony for new building
November 20, 2019 - Lissmac Corp. celebrated the grand opening of their new building in Mechanicville, New York, on November 15. Above: Lissmac staff along with town and state dignitaries attend the ribbon cutting. November 20, 2019 - Lissmac Corp....
-
Lissmac holds groundbreaking ceremony for new U.S. headquarters in Mechanicville, New York
June 24, 2019 - LISSMAC Corporation’s ground breaking ceremony was conducted earlier this month, at the construction site of their new U.S. headquarters, to serve the U.S., Canadian, as well as South and Latin American markets. June 24, 2019 - LISSMAC...
-
Lissmac to hold groundbreaking ceremony for new U.S. headquarters
May 31, 2019 - Lissmac's groundbreaking ceremony is schedule for June 4, 2019 in Mechanicville, New York. May 31, 2019 - LISSMAC Corp. invites all interested parties to attend the ground breaking ceremony at the construction site of our new US...
-
Fabricator prioritizes safety by automating its deburring operations with equipment from Lissmac
focus on continually upgrading and improving its fabrication capabilities. The company recently installed two machines from Lissmac Corp., Waterford, New York, for deburring and oxide removal. According to Gale Pirtle, president, UWI ran some parts at...
-
Lissmac’s design for simultaneous top and bottom grinding, in effect, doubles finishing capacity. Above: Lissmac’s design for simultaneous top and bottom grinding, in effect, doubles finishing capacity. Deslagging machine becomes an invaluable asset...
-
Multipurpose machine package enhances AV equipment maker’s quality, speed and safety Above: The Lissmac unit is able to deburr and edge round parts to dull sharp edges. Multipurpose machine package enhances AV equipment maker’s quality, speed and...
-
Face Time - Prepping part edges after cutting is an important step, says Lissmac Vice President Ingo Heiland Prepping part edges after cutting is an important step, says Lissmac Vice President Ingo Heiland Q: Why is it important to prep edges of sheet...
-
LISSMAC Corp. 17 Route 146 Mechanicville, NY 12188 Office: 518-326-9094 www.lissmac-usa.com Featured product: The SBM-XS The SBM-XS machine for double sided deburring and edge rounding of small parts is the ideal alternative to vibratory and manual...
-
needed to process both sides. We wanted something faster and more efficient.” Haas vetted viable options and decided on the Lissmac SBM-L G1S2 because it can edge round on both sides simultaneously instead of having to turn sheets over and run them...
-
fabricator, All Metals provides custom manufacturing solutions. Needing to modernize, it purchased the SBM-M 1500 S2 from Lissmac Corp. in July 2013. The machine performs light deburring and edge rounding on parts up to 59.07 in. wide. “Our other...
-
Developed about 18 years ago, Steelmaster machines are produced in Beckum, Germany. The product line was acquired by Lissmac Maschinenbau GmbH, Beckum, in April 2012, expanding its existing line of metal processing machines. The company’s U.S....
-
facilities manager of General Sheet Metal Works, South Bend, Ind., purchased a grinding and deburring SBM-L machine from Lissmac Corp., Waterford, N.Y., after having great experiences with a different Lissmac machine. He says the SBM-L is helping the...